Substrate Report for: 1,3-dibromopropane

A novel haloalkane dehalogenase DatA from Agrobacterium tumefaciens C58 belongs to the HLD-II subfamily and hydrolyzes brominated and iodinated compounds, leading to the generation of the corresponding alcohol, a halide ion, and a proton. Because DatA possesses a unique Asn-Tyr pair instead of the Asn-Trp pair conserved among the subfamily members, which was proposed to keep the released halide ion stable, the structural basis for its reaction mechanism should be elucidated. Here, we determined the crystal structures of DatA and its Y109W mutant at 1.70 and 1.95 A, respectively, and confirmed the location of the active site by using its novel competitive inhibitor. The structural information from these two crystal structures and the docking simulation suggested that (i) the replacement of the Asn-Tyr pair with the Asn-Trp pair increases the binding affinity for some halogenated compounds, such as 1,3-dibromopropane, mainly due to the electrostatic interaction between Trp109 and halogenated compounds and the change of substrate-binding mode caused by the interaction and (ii) the primary halide-stabilizing residue is only Asn43 in the wild-type DatA, while Tyr109 is a secondary halide-stabilizing residue. Furthermore, docking simulation using the crystal structures of DatA indicated that its enantioselectivity is determined by the large and small spaces around the halogen-binding site.

DmmA is a haloalkane dehalogenase (HLD) identified and characterized from the metagenomic DNA of a marine microbial consortium. Dehalogenase activity was detected with 1,3-dibromopropane as substrate, with steady-state kinetic parameters typical of HLDs (K(m) = 0.24 +/- 0.05 mM, k(cat) = 2.4 +/- 0.1 s(-1) ). The 2.2-A crystal structure of DmmA revealed a fold and active site similar to other HLDs, but with a substantially larger active site binding pocket, suggestive of an ability to act on bulky substrates. This enhanced cavity was shown to accept a range of linear and cyclic substrates, suggesting that DmmA will contribute to the expanding industrial applications of HLDs.

Haloalkane dehalogenases are enzymes well known to be important in bioremediation; the organisms from which they are produced are able to clean up toxic organohalides from polluted environments. However, besides being found in such contaminated environments, these enzymes have also been found in root or tissue-colonizing bacterial species. The haloalkane dehalogenase Rv2579 from Mycobacterium tuberculosis H37Rv has been cloned, expressed, purified and its crystal structure determined at high resolution (1.2A). In addition, the crystal structure of the enzyme has been determined in complex with the product from the reaction with 1,3-dibromopropane, i.e. 1,3-propanediol and in complex with the classical substrate of haloalkane dehalogenases, 1,2-dichloroethane. The enzyme is a two-domain protein having a catalytic domain of an alpha/beta hydrolase fold and a cap domain. The active site residues and the halide-stabilizing residues have been identified as Asp109, Glu133, His273, Asn39 and Trp110. Its overall structure is similar to those of other known haloalkane dehalogenases. Its mechanism of action involves an SN2 nucleophilic displacement.

A novel haloalkane dehalogenase DatA from Agrobacterium tumefaciens C58 belongs to the HLD-II subfamily and hydrolyzes brominated and iodinated compounds, leading to the generation of the corresponding alcohol, a halide ion, and a proton. Because DatA possesses a unique Asn-Tyr pair instead of the Asn-Trp pair conserved among the subfamily members, which was proposed to keep the released halide ion stable, the structural basis for its reaction mechanism should be elucidated. Here, we determined the crystal structures of DatA and its Y109W mutant at 1.70 and 1.95 A, respectively, and confirmed the location of the active site by using its novel competitive inhibitor. The structural information from these two crystal structures and the docking simulation suggested that (i) the replacement of the Asn-Tyr pair with the Asn-Trp pair increases the binding affinity for some halogenated compounds, such as 1,3-dibromopropane, mainly due to the electrostatic interaction between Trp109 and halogenated compounds and the change of substrate-binding mode caused by the interaction and (ii) the primary halide-stabilizing residue is only Asn43 in the wild-type DatA, while Tyr109 is a secondary halide-stabilizing residue. Furthermore, docking simulation using the crystal structures of DatA indicated that its enantioselectivity is determined by the large and small spaces around the halogen-binding site.

Recently, we found that Alcanivorax bacteria from various marine environments were capable of degrading halogenated alkanes. Genome sequencing of A. dieselolei B-5 revealed two putative haloalkane dehalogenase (HLD) genes, which were supposed to be involved in degradation of halogenated compounds. In this report, we confirm for the first time that the Alcanivorax bacterium encodes a truly functional HLD named DadB. An activity assay with 46 halogenated substrates indicated that DadB possesses broad substrate range and has the highest overall activity among the identified HLDs. DadB prefers brominated substrates; chlorinated alkenes; and the C2-C3 substrates, including the persistent pollutants of 1,2-dichloroethane, 1,2-dichloropropane and 1,2,3-trichloropropane. As DadB displays no detectable activity toward long-chain haloalkanes such as 1-chlorohexadecane and 1-chlorooctadecane, the degradation of them in A. dieselolei B-5 might be attributed to other enzymes. Kinetic constants were determined with 6 substrates. DadB has highest affinity and largest k cat/K m value toward 1,3-dibromopropane (K(m) = 0.82 mM, k(cat)/K(m) = 16.43 mM(-1) . s(-1)). DadB aggregates fast in the buffers with pH </= 7.0, while keeps stable in monomer form when pH >/= 7.5. According to homology modeling, DadB has an open active cavity with a large access tunnel, which is supposed important for larger molecules as opposed to C2-C3 substrates. Combined with the results for other HLDs, we deduce that residue I247 plays an important role in substrate selection. These results suggest that DadB and its host, A. dieselolei B-5, are of potential use for biocatalysis and bioremediation applications.

A putative haloalkane dehalogenase has been identified in a marine Rhodobacteraceae and subsequently cloned and over-expressed in Escherichia coli. The enzyme has highest activity towards the substrates 1,6-dichlorohexane, 1-bromooctane, 1,3-dibromopropane and 1-bromohexane. The crystal structures of the enzyme in the native and product bound forms reveal a large hydrophobic active site cavity. A deeper substrate binding pocket defines the enzyme preference towards substrates with longer carbon chains. Arg136 at the bottom of the substrate pocket is positioned to bind the distal halogen group of extended di-halogenated substrates.

ABSTRACT A method for the detection of haloalkane conversion to the corresponding alcohols by haloalkane dehalogenases is described It is based on a multistage enzyme reaction which allows for the analysis of alkyl halides in buffered systems Irreversible hydrolytic dehalogenation catalyzed by haloalkane dehalogenase DhaA from Rhodococcus erythropolis transfers an alkyl halide into a corresponding alcohol that is further oxidized by alcohol oxidase AOX from Pichia pastoris yielding a respective aldehyde and hydrogen peroxide easily detectable via the horseradish peroxidase catalyzed oxidation of chromogenic molecules Due to its high sensitivity 0.025 mM 0.43 ppm for 1,3-dibromopropane low expenditure and the ability of handling a large number of samples in parallel this method is an attractive alternative to existing procedures for the monitoring of both haloalkanes and dehalogenases.

DmmA is a haloalkane dehalogenase (HLD) identified and characterized from the metagenomic DNA of a marine microbial consortium. Dehalogenase activity was detected with 1,3-dibromopropane as substrate, with steady-state kinetic parameters typical of HLDs (K(m) = 0.24 +/- 0.05 mM, k(cat) = 2.4 +/- 0.1 s(-1) ). The 2.2-A crystal structure of DmmA revealed a fold and active site similar to other HLDs, but with a substantially larger active site binding pocket, suggestive of an ability to act on bulky substrates. This enhanced cavity was shown to accept a range of linear and cyclic substrates, suggesting that DmmA will contribute to the expanding industrial applications of HLDs.

An enzyme's substrate specificity is one of its most important characteristics. The quantitative comparison of broad-specificity enzymes requires the selection of a homogenous set of substrates for experimental testing, determination of substrate-specificity data and analysis using multivariate statistics. We describe a systematic analysis of the substrate specificities of nine wild-type and four engineered haloalkane dehalogenases. The enzymes were characterized experimentally using a set of 30 substrates selected using statistical experimental design from a set of nearly 200 halogenated compounds. Analysis of the activity data showed that the most universally useful substrates in the assessment of haloalkane dehalogenase activity are 1-bromobutane, 1-iodopropane, 1-iodobutane, 1,2-dibromoethane and 4-bromobutanenitrile. Functional relationships among the enzymes were explored using principal component analysis. Analysis of the untransformed specific activity data revealed that the overall activity of wild-type haloalkane dehalogenases decreases in the following order: LinB~DbjA>DhlA~DhaA~DbeA~DmbA>DatA~DmbC~DrbA. After transforming the data, we were able to classify haloalkane dehalogenases into four SSGs (substrate-specificity groups). These functional groups are clearly distinct from the evolutionary subfamilies, suggesting that phylogenetic analysis cannot be used to predict the substrate specificity of individual haloalkane dehalogenases. Structural and functional comparisons of wild-type and mutant enzymes revealed that the architecture of the active site and the main access tunnel significantly influences the substrate specificity of these enzymes, but is not its only determinant. The identification of other structural determinants of the substrate specificity remains a challenge for further research on haloalkane dehalogenases.

Haloalkane dehalogenases are enzymes well known to be important in bioremediation; the organisms from which they are produced are able to clean up toxic organohalides from polluted environments. However, besides being found in such contaminated environments, these enzymes have also been found in root or tissue-colonizing bacterial species. The haloalkane dehalogenase Rv2579 from Mycobacterium tuberculosis H37Rv has been cloned, expressed, purified and its crystal structure determined at high resolution (1.2A). In addition, the crystal structure of the enzyme has been determined in complex with the product from the reaction with 1,3-dibromopropane, i.e. 1,3-propanediol and in complex with the classical substrate of haloalkane dehalogenases, 1,2-dichloroethane. The enzyme is a two-domain protein having a catalytic domain of an alpha/beta hydrolase fold and a cap domain. The active site residues and the halide-stabilizing residues have been identified as Asp109, Glu133, His273, Asn39 and Trp110. Its overall structure is similar to those of other known haloalkane dehalogenases. Its mechanism of action involves an SN2 nucleophilic displacement.

The haloalkane dehalogenase from Sphingomonas paucimobilis UT26 (LinB) is the enzyme involved in the degradation of the important environmental pollutant gamma-hexachlorocyclohexane. The enzyme hydrolyzes a broad range of halogenated cyclic and aliphatic compounds. Here, we present the 1.58 A crystal structure of LinB and the 2.0 A structure of LinB with 1,3-propanediol, a product of debromination of 1,3-dibromopropane, in the active site of the enzyme. The enzyme belongs to the alpha/beta hydrolase family and contains a catalytic triad (Asp108, His272, and Glu132) in the lipase-like topological arrangement previously proposed from mutagenesis experiments. The LinB structure was compared with the structures of haloalkane dehalogenase from Xanthobacter autotrophicus GJ10 and from Rhodococcus sp. and the structural features involved in the adaptation toward xenobiotic substrates were identified. The arrangement and composition of the alpha-helices in the cap domain results in the differences in the size and shape of the active-site cavity and the entrance tunnel. This is the major determinant of the substrate specificity of this haloalkane dehalogenase.