Gene_locus Report for: orysa-LPL1

Lipases belong to a class of esterases whose activity on triglycerides is greatly enhanced at lipid-water interfaces. This phenomenon, called interfacial activation, has a structural explanation: a hydrophobic lid, which at rest covers the catalytic site, is displaced on substrate or inhibitor binding and probably interacts with the lipid matrix. Fusarium solani pisi cutinase belongs to a group of homologous enzymes of relative molecular mass 22-25K (ref. 7) capable of degrading cutin, the insoluble lipid-polyester matrix covering the surface of plants, and hydrolysing triglycerides. Cutinases differ from classical lipases in that they do not exhibit interfacial activation; they are active on soluble as well as on emulsified triglycerides. Cutinases therefore establish a bridge between esterases and lipases. We report here the three-dimensional structure of a recombinant cutinase from F. solani pisi, expressed in Escherichia coli. Cutinase is an alpha-beta protein; the active site is composed of the triad Ser 120, His 188 and Asp 175. Unlike other lipases, the catalytic serine is not buried under surface loops, but is accessible to solvent. This could explain why cutinase does not display interfacial activation.

The cutinase gene from Fusarium solani f. sp. pisi (Nectria hematococa) was cloned and sequenced. Sau3A fragments of genomic DNA from the fungus were cloned in a lambda Charon 35 vector. When restriction fragments generated from the inserts were screened with 5' and 3' probes from cutinase cDNA, a 5.5-kilobase SstI fragment hybridized with both probes, suggesting the presence of the entire cutinase gene. A 2,818-base pair segment was sequenced, revealing a 690-nucleotide open reading frame that was identical to that found in the cutinase cDNA with a single 51-base pair intron. Transformation vectors were constructed containing a promoterless gene for hygromycin resistance, which was translationally fused to flanking sequences of the cutinase gene. When protoplasts and mycelia were transformed with these vectors, hygromycin-resistant transformants were obtained. Successful transformation was assessed by Southern blot analysis by using radiolabeled probes for the hygromycin resistance gene and the putative promoter. The results of Southern blot analysis indicated that the plasmid had integrated into the Fusarium genome and that the antibiotic resistance was a manifestation of the promoter activity of the cutinase flanking sequences. Transformation of Colletotrichum capsici with the same construct confirmed the promoter activity of the flanking region and the integration of the foreign DNA. Transformation and deletion analysis showed that promoter activity resided within the 360 nucleotides immediately 5' to the cutinase initiation codon.

The primary structure of cutinase, an extracellular fungal enzyme involved in the penetration of plants by pathogenic fungi, has been determined from the nucleotide sequence of cloned cDNA. Clones containing cDNA made from poly(A)(+) RNA isolated from fungal cultures induced to synthesize cutinase were screened for their ability to hybridize with the [(32)P]cDNA for mRNA unique to the induced culture. The 75 cDNA clones thus identified were screened for the cutinase genetic code by hybrid-selected translation and examination of products with anti-cutinase IgG. This method yielded 15 clones containing cDNA for cutinase, and Southern blots showed that the size of the cDNA inserts ranged from 279 to 950 nucleotides. Blot analysis showed that cutinase mRNA contained 1050 nucleotides, indicating that the clone containing 950 nucleotides represented nearly the entire mRNA. This near-full-length cDNA and the restriction fragments subcloned from it were sequenced by a combination of the Maxam-Gilbert and the phage M13-dideoxy techniques. cDNAs from two other clones, containing the bulk of the coding region for cutinase, were also completely sequenced, and the results confirmed the sequence obtained with the first clone. A peptide isolated from a trypsin digest of cutinase was sequenced and the amino acid sequence as well as the initiation and termination codons were used to identify the coding region of the cDNA. The primary structure of the enzyme so far determined by amino acid sequencing ( approximately 40% of the total) agreed completely with the nucleotide sequencing results. Thus, the complete primary structure of the mature enzyme and that of the signal peptide region were ascertained.

We report improved whole-genome shotgun sequences for the genomes of indica and japonica rice, both with multimegabase contiguity, or almost 1,000-fold improvement over the drafts of 2002. Tested against a nonredundant collection of 19,079 full-length cDNAs, 97.7% of the genes are aligned, without fragmentation, to the mapped super-scaffolds of one or the other genome. We introduce a gene identification procedure for plants that does not rely on similarity to known genes to remove erroneous predictions resulting from transposable elements. Using the available EST data to adjust for residual errors in the predictions, the estimated gene count is at least 38,000-40,000. Only 2%-3% of the genes are unique to any one subspecies, comparable to the amount of sequence that might still be missing. Despite this lack of variation in gene content, there is enormous variation in the intergenic regions. At least a quarter of the two sequences could not be aligned, and where they could be aligned, single nucleotide polymorphism (SNP) rates varied from as little as 3.0 SNP/kb in the coding regions to 27.6 SNP/kb in the transposable elements. A more inclusive new approach for analyzing duplication history is introduced here. It reveals an ancient whole-genome duplication, a recent segmental duplication on Chromosomes 11 and 12, and massive ongoing individual gene duplications. We find 18 distinct pairs of duplicated segments that cover 65.7% of the genome; 17 of these pairs date back to a common time before the divergence of the grasses. More important, ongoing individual gene duplications provide a never-ending source of raw material for gene genesis and are major contributors to the differences between members of the grass family.

X-ray data have been recorded to 1.0 A resolution from a crystal of Fusarium solani cutinase using synchrotron radiation and an imaging-plate scanner. The anisotropic treatment of thermal motion led to a fivefold increase in accuracy and to a considerable quality improvement in the electron density maps with respect to an intermediate isotropic model. The final model has an R-factor of 9.4%, with a mean coordinate error of 0.021 A, as estimated from inversion of the least-squares matrix. The availability of an accurate structure at atomic resolution and of meaningful estimates of the errors in its atomic parameters, allowed an extensive analysis of several stereochemical parameters, such as peptide planarity, main-chain and some side-chain bond distances. The hydrogen atoms could be clearly identified in the electron density, thus providing unambiguous evidence on the protonation state of the catalytic histidine residue. The atomic resolution revealed an appreciable extent of flexibility in the cutinase active site, which might be correlated with a possible adaptation to different substrates. The anisotropic treatment of thermal factors provided insights into the anisotropic nature of motions. The analysis of these motions in the two loops delimiting the catalytic crevice pointed out a "breath-like" movement in the substrate binding region of cutinase.

Essentially complete (96%) sequence-specific assignments were made for the backbone and side-chain 1H, 13C, and 15N resonances of Fusarium solani pisi cutinase, produced as a 214-residue heterologous protein in Escherichia coli, using heteronuclear NMR techniques. Three structural features were noticed during the assignment. (1) The secondary structure in solution corresponds mostly with the structure from X-ray diffraction, suggesting that both structures are globally similar. (2) The HN of Ala32 has a strongly upfield-shifted resonance at 3.97 ppm, indicative of an amide-aromatic hydrogen bond to the indole ring of Trp69 that stabilizes the N-terminal side of the parallel beta-sheet. (3) The NMR data suggest that the residues constituting the oxyanion hole are quite mobile in the free enzyme in solution, in contrast to the existence of a preformed oxyanion hole as observed in the crystal structure. Apparently, cutinase forms its oxyanion hole upon binding of the substrate like true lipases.

Cutinases, a group of cutin degrading enzymes with molecular masses of around 22-25 kDa (Kolattukudy, 1984), are also able to efficiently hydrolyse triglycerides (De Geus et al., 1989; Lauwereys et al., 1991), but without exhibiting the interfacial activation phenomenom (Sarda et al., 1958). They belong to a class of proteins with a common structural framework, called the alpha/beta hydrolase fold (Martinez et al., 1992; Ollis et al., 1992). We describe herein the structure of cutinase covalently inhibited by diethyl-p-nitrophenyl phosphate (E600) and refined at 1.9-A resolution. Contrary to what has previously been reported with lipases (Brzozowski et al., 1991; Derewenda et al., 1992; Van Tilbeurgh et al., 1993), no significant structural rearrangement was observed here in cutinase upon the inhibitor binding. Moreover, the structure of the active site machinery, consisting of a catalytic triad (S120, H188, D175) and an oxyanion hole (Q121 and S42), was found to be identical to that of the native enzyme, whereas the oxyanion hole of Rhizomucor lipase (Brzozowski et al., 1991; Derewenda et al., 1992), like that of pancreatic lipase (van Tilbeurgh et al., 1993), is formed only upon enzyme-ligand complex formation. The fact that cutinase does not display interfacial activation cannot therefore only be due to the absence of a lid but might also be attributable to the presence of a preformed oxyanion hole.

Lipases belong to a class of esterases whose activity on triglycerides is greatly enhanced at lipid-water interfaces. This phenomenon, called interfacial activation, has a structural explanation: a hydrophobic lid, which at rest covers the catalytic site, is displaced on substrate or inhibitor binding and probably interacts with the lipid matrix. Fusarium solani pisi cutinase belongs to a group of homologous enzymes of relative molecular mass 22-25K (ref. 7) capable of degrading cutin, the insoluble lipid-polyester matrix covering the surface of plants, and hydrolysing triglycerides. Cutinases differ from classical lipases in that they do not exhibit interfacial activation; they are active on soluble as well as on emulsified triglycerides. Cutinases therefore establish a bridge between esterases and lipases. We report here the three-dimensional structure of a recombinant cutinase from F. solani pisi, expressed in Escherichia coli. Cutinase is an alpha-beta protein; the active site is composed of the triad Ser 120, His 188 and Asp 175. Unlike other lipases, the catalytic serine is not buried under surface loops, but is accessible to solvent. This could explain why cutinase does not display interfacial activation.

The cutinase gene from Fusarium solani f. sp. pisi (Nectria hematococa) was cloned and sequenced. Sau3A fragments of genomic DNA from the fungus were cloned in a lambda Charon 35 vector. When restriction fragments generated from the inserts were screened with 5' and 3' probes from cutinase cDNA, a 5.5-kilobase SstI fragment hybridized with both probes, suggesting the presence of the entire cutinase gene. A 2,818-base pair segment was sequenced, revealing a 690-nucleotide open reading frame that was identical to that found in the cutinase cDNA with a single 51-base pair intron. Transformation vectors were constructed containing a promoterless gene for hygromycin resistance, which was translationally fused to flanking sequences of the cutinase gene. When protoplasts and mycelia were transformed with these vectors, hygromycin-resistant transformants were obtained. Successful transformation was assessed by Southern blot analysis by using radiolabeled probes for the hygromycin resistance gene and the putative promoter. The results of Southern blot analysis indicated that the plasmid had integrated into the Fusarium genome and that the antibiotic resistance was a manifestation of the promoter activity of the cutinase flanking sequences. Transformation of Colletotrichum capsici with the same construct confirmed the promoter activity of the flanking region and the integration of the foreign DNA. Transformation and deletion analysis showed that promoter activity resided within the 360 nucleotides immediately 5' to the cutinase initiation codon.

The primary structure of cutinase, an extracellular fungal enzyme involved in the penetration of plants by pathogenic fungi, has been determined from the nucleotide sequence of cloned cDNA. Clones containing cDNA made from poly(A)(+) RNA isolated from fungal cultures induced to synthesize cutinase were screened for their ability to hybridize with the [(32)P]cDNA for mRNA unique to the induced culture. The 75 cDNA clones thus identified were screened for the cutinase genetic code by hybrid-selected translation and examination of products with anti-cutinase IgG. This method yielded 15 clones containing cDNA for cutinase, and Southern blots showed that the size of the cDNA inserts ranged from 279 to 950 nucleotides. Blot analysis showed that cutinase mRNA contained 1050 nucleotides, indicating that the clone containing 950 nucleotides represented nearly the entire mRNA. This near-full-length cDNA and the restriction fragments subcloned from it were sequenced by a combination of the Maxam-Gilbert and the phage M13-dideoxy techniques. cDNAs from two other clones, containing the bulk of the coding region for cutinase, were also completely sequenced, and the results confirmed the sequence obtained with the first clone. A peptide isolated from a trypsin digest of cutinase was sequenced and the amino acid sequence as well as the initiation and termination codons were used to identify the coding region of the cDNA. The primary structure of the enzyme so far determined by amino acid sequencing ( approximately 40% of the total) agreed completely with the nucleotide sequencing results. Thus, the complete primary structure of the mature enzyme and that of the signal peptide region were ascertained.