Family Report for: Cutinase

Lipases belong to a class of esterases whose activity on triglycerides is greatly enhanced at lipid-water interfaces. This phenomenon, called interfacial activation, has a structural explanation: a hydrophobic lid, which at rest covers the catalytic site, is displaced on substrate or inhibitor binding and probably interacts with the lipid matrix. Fusarium solani pisi cutinase belongs to a group of homologous enzymes of relative molecular mass 22-25K (ref. 7) capable of degrading cutin, the insoluble lipid-polyester matrix covering the surface of plants, and hydrolysing triglycerides. Cutinases differ from classical lipases in that they do not exhibit interfacial activation; they are active on soluble as well as on emulsified triglycerides. Cutinases therefore establish a bridge between esterases and lipases. We report here the three-dimensional structure of a recombinant cutinase from F. solani pisi, expressed in Escherichia coli. Cutinase is an alpha-beta protein; the active site is composed of the triad Ser 120, His 188 and Asp 175. Unlike other lipases, the catalytic serine is not buried under surface loops, but is accessible to solvent. This could explain why cutinase does not display interfacial activation.

A gene from Magnaporthe grisea was cloned using a cDNA clone of the Colletotrichum gloeosporioides cutinase gene as a heterologous probe; the nucleotide sequence of a 2 kb DNA segment containing the gene has been determined. DNA hybridization analysis shows that the M. grisea genome contains only one copy of this gene. The predicted polypeptide contains 228 amino acids and is homologous to the three previously characterized cutinases, showing 74% amino acid similarity to the cutinase of C. gloeosporioides. Comparison with previously determined cutinase sequences suggests that the gene contains two introns, 115 and 147 bp in length. The gene is expressed when cutin is the sole carbon source but not when the carbon source is cutin and glucose together or glucose alone. Levels of intracellular and extracellular cutinase activity increase in response to growth in the presence of cutin. The activity level is higher in a transformant containing multiple copies of the cloned gene than in the parent strain. Non-denaturing polyacrylamide gels stained for esterase activity show a single major band among intracellular and extracellular proteins from cutin-grown cultures that is not present among intracellular and extracellular proteins prepared from glucose-grown or carbon-starved cultures. This band stains more intensely in extracts from the multicopy transformant than in extracts from the parent strain. We conclude that the cloned DNA contains a M. grisea gene for cutinase, which we have named CUT1.

Cutinase is an extracellular fungal enzyme that allows pathogenic fungi to penetrate through the cuticular barrier into the host plant during the initial stages of the fungal infection. mRNA isolated from glucose-grown Colletotrichum capsid, induced to produce cutinase by the addition of cutin hydrolysate, was used to prepare cDNA which was cloned in the expression vector Xgtl1. The primary structure of the cutinase from C.capsid was deduced from the nucleotide sequence of the cloned cutinase cDNA. Amino acid sequences of two tryptic peptides isolated from cutinase produced by C.capsid completely matched with two segments of the amino acid sequence deduced from the nucleotide sequence, strongly suggesting that the cloned cDNA was authentic cutinase cDNA. The cDNA clone was used as a probe to screen C.capsid and Colletotrichum gloeosporioides genomic libraries constructed in Charon35 and EMBL3, respectively. The nucleotide sequences of the cutinase structural genes from C.capsid and C.gloeosporioides were also determined. SI mapping was used to reveal the transcriptional start sites and polyadenylation site of the primary transcript from C.capsid. The primary sequences and gene structure of the enzymes from th eColletotrichum species were compared with the primary structure and gene structure of a cutinase from Fusarium solani f.sp. pisi. A comparison of the deduced primary structures of the enzymes showed that residues involved in the catalytic triad andd isulfide cross-linking of cutinase are strongly conserved. Yet, only 43% of the residues areconserved between all three enzymes. A comparison of the structure of the three genes revealed the location of the single intron has been conserved. The transcriptional start site of the C.capsid gene was centered on the sequence TCCAGACCA, the core of which (CAGAC) is found repeated after 21 nucleotides. The same core sequence, repeated after 11 nucleotides, was also identified in the 5' non translated regions of the C. gloeosporioides and F. solanigenes.

BACKGROUND: Cutinases are serine hydrolases that degrade cutin, a polyester of fatty acids that is the main component of plant cuticle. These biocatalysts have recently attracted increased biotechnological interest due to their potential to modify and degrade polyethylene terephthalate (PET), as well as other synthetic polymers.
METHODS: A cutinase from the mesophilic fungus Fusarium oxysporum, named FoCut5a, was expressed either in the cytoplasm or periplasm of Escherichia coli BL21. Its X-ray structure was determined to 1.9A resolution using molecular replacement. The activity of the recombinant enzyme was tested on a variety of synthetic esters and polyester analogues.
RESULTS: The highest production of recombinant FoCut5a was achieved using periplasmic expression at 16 degrees C. Its crystal structure is highly similar to previously determined Fusarium solani cutinase structure. However, a more detailed comparison of the surface properties and amino acid interactions revealed differences with potential impact on the biochemical properties of the two enzymes. FoCut5a showed maximum activity at 40 degrees C and pH8.0, while it was active on three p-nitrophenyl synthetic esters of aliphatic acids (C2, C4, C12), with the highest catalytic efficiency for the hydrolysis of the butyl ester. The recombinant cutinase was also found capable of hydrolyzing PET model substrates and synthetic polymers.
CONCLUSIONS: The present work is the first reported expression and crystal structure determination of a functional cutinase from the mesophilic fungus F. oxysporum with potential application in surface modification of PET synthetic polymers. GENERAL SIGNIFICANCE: FoCut5a could be used as a biocatalyst in industrial applications for the environmentally-friendly treatment of synthetic polymers.

The interaction of lipolytic enzymes with anionic surfactants is of great interest with respect to industrially produced detergents. Here, we report the interaction of cutinase from the thermophilic fungus Humicola insolens with the anionic surfactant SDS, and show the enzyme specifically binds a single SDS molecule under nondenaturing concentrations. Protein interaction with SDS was investigated by NMR, ITC and molecular dynamics simulations. The NMR resonances of the protein were assigned, with large stretches of the protein molecule not showing any detectable resonances. SDS is shown to specifically interact with the loops surrounding the catalytic triad with medium affinity (Ka approximately 105 M-1 ). The mode of binding is closely similar to that seen previously for binding of amphiphilic molecules and substrate analogues to cutinases, and hence SDS acts as a substrate mimic. In addition, the structure of the enzyme has been solved by X-ray crystallography in its apo form and after cocrystallization with diethyl p-nitrophenyl phosphate (DNPP) leading to a complex with monoethylphosphate (MEP) esterified to the catalytically active serine. The enzyme has the same fold as reported for other cutinases but, unexpectedly, esterification of the active site serine is accompanied by the ethylation of the active site histidine which flips out from its usual position in the triad.

Cutinases belong to the alpha/beta-hydrolase fold family of enzymes and degrade cutin and various esters, including triglycerides, phospholipids and galactolipids. Cutinases are able to degrade aggregated and soluble substrates because, in contrast with true lipases, they do not have a lid covering their catalytic machinery. We report here the structure of a cutinase from the fungus Trichoderma reesei (Tr) in native and inhibitor-bound conformations, along with its enzymatic characterization. A rare characteristic of Tr cutinase is its optimal activity at acidic pH. Furthermore, Tr cutinase, in contrast with classical cutinases, possesses a lid covering its active site and requires the presence of detergents for activity. In addition to the presence of the lid, the core of the Tr enzyme is very similar to other cutinase cores, with a central five-stranded beta-sheet covered by helices on either side. The catalytic residues form a catalytic triad involving Ser164, His229 and Asp216 that is covered by the two N-terminal helices, which form the lid. This lid opens in the presence of surfactants, such as beta-octylglucoside, and uncovers the catalytic crevice, allowing a C11Y4 phosphonate inhibitor to bind to the catalytic serine. Taken together, these results reveal Tr cutinase to be a member of a new group of lipolytic enzymes resembling cutinases but with kinetic and structural features of true lipases and a heightened specificity for long-chain triglycerides.

The highly complex and unique mycobacterial cell wall is critical to the survival of Mycobacteria in host cells. However, the biosynthetic pathways responsible for its synthesis are, in general, incompletely characterized. Rv3802c from Mycobacterium tuberculosis is a partially characterized phospholipase/thioesterase encoded within a genetic cluster dedicated to the synthesis of core structures of the mycobacterial cell wall, including mycolic acids and arabinogalactan. Enzymatic assays performed with purified recombinant proteins Rv3802c and its close homologs from Mycobacterium smegmatis (MSMEG_6394) and Corynebacterium glutamicum (NCgl2775) show that they all have significant lipase activities that are inhibited by tetrahydrolipstatin, an anti-obesity drug that coincidently inhibits mycobacterial cell wall biosynthesis. The crystal structure of MSMEG_6394, solved to 2.9 A resolution, revealed an alpha/beta hydrolase fold and a catalytic triad typically present in esterases and lipases. Furthermore, we demonstrate direct evidence of gene essentiality in M. smegmatis and show the structural consequences of loss of MSMEG_6394 function on the cellular integrity of the organism. These findings, combined with the predicted essentiality of Rv3802c in M. tuberculosis, indicate that the Rv3802c family performs a fundamental and indispensable lipase-associated function in mycobacteria.

The structural and enzymatic characteristics of a cutinase-like enzyme (CLE) from Cryptococcus sp. strain S-2, which exhibits remote homology to a lipolytic enzyme and a cutinase from the fungus Fusarium solani (FS cutinase), were compared to investigate the unique substrate specificity of CLE. The crystal structure of CLE was solved to a 1.05 A resolution. Moreover, hydrolysis assays demonstrated the broad specificity of CLE for short and long-chain substrates, as well as the preferred specificity of FS cutinase for short-chain substrates. In addition, site-directed mutagenesis was performed to increase the hydrolysis activity on long-chain substrates, indicating that the hydrophobic aromatic residues are important for the specificity to the long-chain substrate. These results indicate that hydrophobic residues, especially the aromatic ones exposed to solvent, are important for retaining lipase activity.

Cutinases are responsible for hydrolysis of the protective cutin lipid polyester matrix in plants and thus have been exploited for hydrolysis of small molecule esters and polyesters. Here we explore the reactivity, stability, and structure of Aspergillus oryzae cutinase and compare it to the well-studied enzyme from Fusarium solani. Two critical differences are highlighted in the crystallographic analysis of the A. oryzae structure: (i) an additional disulfide bond and (ii) a topologically favored catalytic triad with a continuous and deep groove. These structural features of A. oryzae cutinase are proposed to result in an improved hydrolytic activity and altered substrate specificity profile, enhanced thermostability, and remarkable reactivity toward the degradation of the synthetic polyester polycaprolactone. The results presented here provide insight into engineering new cutinase-inspired biocatalysts with tailor-made properties.

Cutinase belongs to a group of enzymes that catalyze the hydrolysis of esters and triglycerides. Structural studies on the enzyme from Fusarium solani have revealed the presence of a classic catalytic triad that has been implicated in the enzyme's mechanism. We have solved the crystal structure of Glomerella cingulata cutinase in the absence and in the presence of the inhibitors E600 (diethyl p-nitrophenyl phosphate) and PETFP (3-phenethylthio-1,1,1-trifluoropropan-2-one) to resolutions between 2.6 and 1.9 A. Analysis of these structures reveals that the catalytic triad (Ser136, Asp191, and His204) adopts an unusual configuration with the putative essential histidine His204 swung out of the active site into a position where it is unable to participate in catalysis, with the imidazole ring 11 A away from its expected position. Solution-state NMR experiments are consistent with the disrupted configuration of the triad observed crystallographically. H204N, a site-directed mutant, was shown to be catalytically inactive, confirming the importance of this residue in the enzyme mechanism. These findings suggest that, during its catalytic cycle, cutinase undergoes a significant conformational rearrangement converting the loop bearing the histidine from an inactive conformation, in which the histidine of the triad is solvent exposed, to an active conformation, in which the triad assumes a classic configuration.

Mycobacteriophages encounter a unique problem among phages of Gram-positive bacteria, in that lysis must not only degrade the peptidoglycan layer but also circumvent a mycolic acid-rich outer membrane covalently attached to the arabinogalactan-peptidoglycan complex. Mycobacteriophages accomplish this by producing two lysis enzymes, Lysin A (LysA) that hydrolyses peptidoglycan, and Lysin B (LysB), a novel mycolylarabinogalactan esterase, that cleaves the mycolylarabinogalactan bond to release free mycolic acids. The D29 LysB structure shows an alpha/beta hydrolase organization with a catalytic triad common to cutinases, but which contains an additional four-helix domain implicated in the binding of lipid substrates. Whereas LysA is essential for mycobacterial lysis, a Giles DeltalysB mutant mycobacteriophage is viable, but defective in the normal timing, progression and completion of host cell lysis. We propose that LysB facilitates lysis by compromising the integrity of the mycobacterial outer membrane linkage to the arabinogalactan-peptidoglycan layer.

The first crystal structures of lipases that have been covalently modified through site-selective inhibition by different organometallic phosphonate-pincer-metal complexes are described. Two ECE-pincer-type d(8)-metal complexes, that is, platinum (1) or palladium (2) with phosphonate esters (ECE = [(EtO)-(O=)P(-O-C(6)H(4)-(NO(2))-4)(-C(3)H(6)-4-(C(6)H(2)-(CH(2)E)(2))](-); E = NMe(2) or SMe) were introduced prior to crystallization and have been shown to bind selectively to the Ser(120) residue in the active site of the lipase cutinase to give cut-1 (platinum) or cut-2 (palladium) hybrids. For all five presented crystal structures, the ECE-pincer-platinum or -palladium head group sticks out of the cutinase molecule and is exposed to the solvent. Depending on the nature of the ECE-pincer-metal head group, the ECE-pincer-platinum and -palladium guests occupy different pockets in the active site of cutinase, with concomitant different stereochemistries on the phosphorous atom for the cut-1 (S(P)) and cut-2 (R(P)) structures. When cut-1 was crystallized under halide-poor conditions, a novel metal-induced dimeric structure was formed between two cutinase-bound pincer-platinum head groups, which are interconnected through a single mu-Cl bridge. This halide-bridged metal dimer shows that coordination chemistry is possible with protein-modified pincer-metal complexes. Furthermore, we could use NCN-pincer-platinum complex 1 as site-selective tool for the phasing of raw protein diffraction data, which shows the potential use of pincer-platinum complex 1 as a heavy-atom derivative in protein crystallography.

The work described herein presents a strategy for the regioselective introduction of organometallic complexes into the active site of the lipase cutinase. Nitrophenol phosphonate esters, well known for their lipase inhibitory activity, are used as anchor functionalities and were found to be ideal tools to develop a single-site-directed immobilization method. A small series of phosphonate esters, covalently attached to ECE "pincer"-type d8-metal complexes through a propyl tether (ECE=[C6H3(CH2E)(2)-2,6]-; E=NR2 or SR), were designed and synthesized. Cutinase was treated with these organometallic phosphonate esters and the new metal-complex/protein hybrids were identified as containing exactly one organometallic unit per protein. The organometallic proteins were purified by membrane dialysis and analyzed by ESI-mass spectrometry. The major advantages of this strategy are: 1) one transition metal can be introduced regioselectively and, hence, the metal environment can potentially be fine-tuned; 2) purification procedures are facile due to the use of pre-synthesized metal complexes; and, most importantly, 3) the covalent attachment of robust organometallic pincer complexes to an enzyme is achieved, which will prevent metal leaching from these hybrids. The approach presented herein can be regarded as a tool in the development of regio- and enantioselective catalyst as well as analytical probes for studying enzyme properties (e.g., structure) and, hence, is a "proof-of-principle design" study in enzyme chemistry.

A purified lipase from the yeast Cryptococcus sp. strain S-2 exhibited remote homology to proteins belonging to the cutinase family rather than to lipases. This enzyme could effectively degrade the high-molecular-weight compound polylactic acid, as well as other biodegradable plastics, including polybutylene succinate, poly (epsilon-caprolactone), and poly(3-hydroxybutyrate).

Mycobacteriophage D29 is a lytic phage that infects both fast and slow-growing mycobacterial species. The complete genome sequence of D29 reveals that it is a close relative of the temperate mycobacteriophage L5, whose sequence has been described previously. The overall organization of the D29 genome is similar to that of L5, although a 3.6 kb deletion removing the repressor gene accounts for the inability of D29 to form lysogens. Comparison of the two genomes shows that they are punctuated by a large number of insertions, deletions, and substitutions of genes, consistent with the genetic mosaicism of lambdoid phages.

Cutinase from Fusarium solani is a lipolytic enzyme that hydrolyses triglycerides efficiently All the inhibited forms of lipolytic enzymes described so far are based on the use of small organophosphate and organophosphonate inhibitors which bear little resemblance to a natural triglyceride substrate In this article we describe the crystal structure of cutinase covalently inhibited by R)-1,2-dibutyl carbamoylglycero-3-O-p-nitrophenylbutyl-phos phonate a triglyceride analogue mimicking the first tetrahedral intermediate along the reaction pathway The structure which has been solved at 2.3 A reveals that in both the protein molecules of the asymmetric unit the inhibitor is almost completely embedded in the active site crevice The overall shape of the inhibitor is that of a fork the two dibutyl carbamoyl chains point towards the surface of the protein whereas the butyl chain bound to the phosphorous atom is roughly perpendicular to the sn-1 and sn-2 chains The sn-3 chain is accommodated in a rather small pocket at the bottom of the active site crevice thus providing a structural explanation for the preference of cutinase for short acyl chain substrates

In characterizing mutants and covalently inhibited complexes of Fusarium solani cutinase, which is a 197-residue lipolytic enzyme, 34 variant structures, crystallizing in 8 different crystal forms, have been determined, mostly at high resolution. Taking advantage of this considerable body of information, a structural comparative analysis was carried out to investigate the dynamics of cutinase. Surface loops were identified as the major flexible protein regions, particularly those forming the active-site groove, whereas the elements constituting the protein scaffold were found to retain the same conformation in all the cutinase variants studied. Flexibility turned out to be correlated with thermal motion. With a given crystal packing environment, a high flexibility turned out to be correlated with a low involvement in crystal packing contacts. The high degree of crystal polymorphism, which allowed different conformations with similar energy to be detected, made it possible to identify motions which would have remained unidentified if only a single crystal form had been available. Fairly good agreement was found to exist between the data obtained from the structural comparison and those from a molecular dynamics (MD) simulation carried out on the native enzyme. The crystallographic approach used in this study turned out to be a suitable tool for investigating cutinase dynamics. Because of the availability of a set of closely related proteins in different crystal environments, the intrinsic drawback of a crystallographic approach was bypassed. By combining several static pictures, the dynamics of the protein could be monitored much more realistically than what can be achieved on the basis of static pictures alone.

Cutinases, a group of cutin degrading enzymes with molecular masses of around 22-25 kDa (Kolattukudy, 1984), are also able to efficiently hydrolyse triglycerides (De Geus et al., 1989; Lauwereys et al., 1991), but without exhibiting the interfacial activation phenomenom (Sarda et al., 1958). They belong to a class of proteins with a common structural framework, called the alpha/beta hydrolase fold (Martinez et al., 1992; Ollis et al., 1992). We describe herein the structure of cutinase covalently inhibited by diethyl-p-nitrophenyl phosphate (E600) and refined at 1.9-A resolution. Contrary to what has previously been reported with lipases (Brzozowski et al., 1991; Derewenda et al., 1992; Van Tilbeurgh et al., 1993), no significant structural rearrangement was observed here in cutinase upon the inhibitor binding. Moreover, the structure of the active site machinery, consisting of a catalytic triad (S120, H188, D175) and an oxyanion hole (Q121 and S42), was found to be identical to that of the native enzyme, whereas the oxyanion hole of Rhizomucor lipase (Brzozowski et al., 1991; Derewenda et al., 1992), like that of pancreatic lipase (van Tilbeurgh et al., 1993), is formed only upon enzyme-ligand complex formation. The fact that cutinase does not display interfacial activation cannot therefore only be due to the absence of a lid but might also be attributable to the presence of a preformed oxyanion hole.

Lipases belong to a class of esterases whose activity on triglycerides is greatly enhanced at lipid-water interfaces. This phenomenon, called interfacial activation, has a structural explanation: a hydrophobic lid, which at rest covers the catalytic site, is displaced on substrate or inhibitor binding and probably interacts with the lipid matrix. Fusarium solani pisi cutinase belongs to a group of homologous enzymes of relative molecular mass 22-25K (ref. 7) capable of degrading cutin, the insoluble lipid-polyester matrix covering the surface of plants, and hydrolysing triglycerides. Cutinases differ from classical lipases in that they do not exhibit interfacial activation; they are active on soluble as well as on emulsified triglycerides. Cutinases therefore establish a bridge between esterases and lipases. We report here the three-dimensional structure of a recombinant cutinase from F. solani pisi, expressed in Escherichia coli. Cutinase is an alpha-beta protein; the active site is composed of the triad Ser 120, His 188 and Asp 175. Unlike other lipases, the catalytic serine is not buried under surface loops, but is accessible to solvent. This could explain why cutinase does not display interfacial activation.

A gene from Magnaporthe grisea was cloned using a cDNA clone of the Colletotrichum gloeosporioides cutinase gene as a heterologous probe; the nucleotide sequence of a 2 kb DNA segment containing the gene has been determined. DNA hybridization analysis shows that the M. grisea genome contains only one copy of this gene. The predicted polypeptide contains 228 amino acids and is homologous to the three previously characterized cutinases, showing 74% amino acid similarity to the cutinase of C. gloeosporioides. Comparison with previously determined cutinase sequences suggests that the gene contains two introns, 115 and 147 bp in length. The gene is expressed when cutin is the sole carbon source but not when the carbon source is cutin and glucose together or glucose alone. Levels of intracellular and extracellular cutinase activity increase in response to growth in the presence of cutin. The activity level is higher in a transformant containing multiple copies of the cloned gene than in the parent strain. Non-denaturing polyacrylamide gels stained for esterase activity show a single major band among intracellular and extracellular proteins from cutin-grown cultures that is not present among intracellular and extracellular proteins prepared from glucose-grown or carbon-starved cultures. This band stains more intensely in extracts from the multicopy transformant than in extracts from the parent strain. We conclude that the cloned DNA contains a M. grisea gene for cutinase, which we have named CUT1.

Cutinase is an extracellular fungal enzyme that allows pathogenic fungi to penetrate through the cuticular barrier into the host plant during the initial stages of the fungal infection. mRNA isolated from glucose-grown Colletotrichum capsid, induced to produce cutinase by the addition of cutin hydrolysate, was used to prepare cDNA which was cloned in the expression vector Xgtl1. The primary structure of the cutinase from C.capsid was deduced from the nucleotide sequence of the cloned cutinase cDNA. Amino acid sequences of two tryptic peptides isolated from cutinase produced by C.capsid completely matched with two segments of the amino acid sequence deduced from the nucleotide sequence, strongly suggesting that the cloned cDNA was authentic cutinase cDNA. The cDNA clone was used as a probe to screen C.capsid and Colletotrichum gloeosporioides genomic libraries constructed in Charon35 and EMBL3, respectively. The nucleotide sequences of the cutinase structural genes from C.capsid and C.gloeosporioides were also determined. SI mapping was used to reveal the transcriptional start sites and polyadenylation site of the primary transcript from C.capsid. The primary sequences and gene structure of the enzymes from th eColletotrichum species were compared with the primary structure and gene structure of a cutinase from Fusarium solani f.sp. pisi. A comparison of the deduced primary structures of the enzymes showed that residues involved in the catalytic triad andd isulfide cross-linking of cutinase are strongly conserved. Yet, only 43% of the residues areconserved between all three enzymes. A comparison of the structure of the three genes revealed the location of the single intron has been conserved. The transcriptional start site of the C.capsid gene was centered on the sequence TCCAGACCA, the core of which (CAGAC) is found repeated after 21 nucleotides. The same core sequence, repeated after 11 nucleotides, was also identified in the 5' non translated regions of the C. gloeosporioides and F. solanigenes.