Family Report for: Bacterial_lip_FamI.1

Lipase's thermostability and organic solvent tolerance are two crucial properties that enable it to function as a biocatalyst. This study examined the characteristics of two recombinant thermostable lipases (Lk2, Lk3) based on transesterification activity. Conversion of C12-C18 methyl ester with paranitrophenol was investigated in various organic solvent. Both lipases exhibited activity on difference carbon chain length (C12 - C18, C18:1, C18:2) of substrates. The activity of Lk2 was higher in each of substrate compared to that the Lk3. Experimental findings showed that the best substrates for Lk2 and Lk3 are C18:1 and C18:2 respectively, in agreement with the computational analysis. The activity of both enzymes prefers on nonpolar solvent. On nonpolar solvent the enzymes are able to keep its native folding shown by the value of radius gyration, solvent-enzyme interaction and orientation of triad catalytic residues. Lk3 appeared to be more thermostable, with maximum activity at 55 degreesC. The presence of Fe3+ increased the activity of Lk2 and Lk3. However, the activity of both enzymes were dramatically decreased by the present of Ca2+ despite of the enzymes belong to family I.1 lipase known as calcium dependent enzyme. Molecular analysis on His loop of Lk2 and Lk3 on the present of Ca2+ showed that there were shifting on the orientation of catalytic triad residues. All the data suggest that Lk2 and Lk3 are novel lipase on the family I.1 and both lipase available as a biocatalyst candidate.

Lipases constitute the most important group of biocatalysts for biotechnological applications. The high-level production of microbial lipases requires not only the efficient overexpression of the corresponding genes but also a detailed understanding of the molecular mechanisms governing their folding and secretion. The optimisation of industrially relevant lipase properties can be achieved by directed evolution. Furthermore, novel biotechnological applications have been successfully established using lipases for the synthesis of biopolymers and biodiesel, the production of enantiopure pharmaceuticals, agrochemicals, and flavour compounds.

Knowledge of bacterial lipolytic enzymes is increasing at a rapid and exciting rate. To obtain an overview of this industrially very important class of enzymes and their characteristics, we have collected and classified the information available from protein and nucleotide databases. Here we propose an updated and extensive classification of bacterial esterases and lipases based mainly on a comparison of their amino acid sequences and some fundamental biological properties. These new insights result in the identification of eight different families with the largest being further divided into six subfamilies. Moreover, the classification enables us to predict (1) important structural features such as residues forming the catalytic site or the presence of disulphide bonds, (2) types of secretion mechanism and requirement for lipase-specific foldases, and (3) the potential relationship to other enzyme families. This work will therefore contribute to a faster identification and to an easier characterization of novel bacterial lipolytic enzymes.

Lipase's thermostability and organic solvent tolerance are two crucial properties that enable it to function as a biocatalyst. This study examined the characteristics of two recombinant thermostable lipases (Lk2, Lk3) based on transesterification activity. Conversion of C12-C18 methyl ester with paranitrophenol was investigated in various organic solvent. Both lipases exhibited activity on difference carbon chain length (C12 - C18, C18:1, C18:2) of substrates. The activity of Lk2 was higher in each of substrate compared to that the Lk3. Experimental findings showed that the best substrates for Lk2 and Lk3 are C18:1 and C18:2 respectively, in agreement with the computational analysis. The activity of both enzymes prefers on nonpolar solvent. On nonpolar solvent the enzymes are able to keep its native folding shown by the value of radius gyration, solvent-enzyme interaction and orientation of triad catalytic residues. Lk3 appeared to be more thermostable, with maximum activity at 55 degreesC. The presence of Fe3+ increased the activity of Lk2 and Lk3. However, the activity of both enzymes were dramatically decreased by the present of Ca2+ despite of the enzymes belong to family I.1 lipase known as calcium dependent enzyme. Molecular analysis on His loop of Lk2 and Lk3 on the present of Ca2+ showed that there were shifting on the orientation of catalytic triad residues. All the data suggest that Lk2 and Lk3 are novel lipase on the family I.1 and both lipase available as a biocatalyst candidate.

Because of the complex mechanisms of enzymatic reactions, no precise and simple method of understanding and controlling the chiral selectivity of enzymes has been developed. However, structure-based rational design is a powerful approach to engineering enzymes with desired catalytic activities. In this work, a simple, structure-based, large-scale in silico design and virtual screening strategy was developed and successfully applied to enzyme engineering. We first performed protein crystallization and X-ray diffraction to determine the structure of lipase LipK107, which is a novel family I.1 lipase displaying activity for both R and S isomers in chiral resolution reactions. The catalytic mechanism of family I.1, which includes LipK107, was ascertained first through comparisons of the sequences and structures of lipases from other families. The binding states of LipK107, including the energy and the conformation of complexes with the R and S enantiomers, have been evaluated by careful biocomputation to figure out the reason for the higher S selectivity. Based on this study, a simple strategy for manipulating the chiral selectivity by modulating a crucial distance in the enzyme-substrate complex and judging virtual mutations in silico is recommended. Then, a novel electrostatic interaction analysis protocol was used to design LipK107 mutants to validate our strategy. Both positive and negative mutations determined using this theoretical protocol have been implemented in wet experiments and were proved to produce the desired enantioselectivity, showing a 176% increase or 50% decrease in enantioselectivity as desired. Because of its accuracy and versatility, the strategy is promising for practical applications.

BACKGROUND: Biodiesels are methyl esters of fatty acids that are usually produced by base catalyzed transesterification of triacylglyerol with methanol. Some lipase enzymes are effective catalysts for biodiesel synthesis and have many potential advantages over traditional base or acid catalyzed trasesterification. Natural lipases are often rapidly inactivated by the high methanol concentrations used for biodiesel synthesis, however, limiting their practical use. The lipase from Proteus mirabilis is a particularly promising catalyst for biodiesel synthesis as it produces high yields of methyl esters even in the presence of large amounts of water and expresses very well in Escherichia coli. However, since the Proteus mirabilis lipase is only moderately stable and methanol tolerant, these properties need to be improved before the enzyme can be used industrially. RESULTS: We employed directed evolution, resulting in a Proteus mirabilis lipase variant with 13 mutations, which we call Dieselzyme 4. Dieselzyme 4 has greatly improved thermal stability, with a 30-fold increase in the half-inactivation time at 50[degree sign]C relative to the wild-type enzyme. The evolved enzyme also has dramatically increased methanol tolerance, showing a 50-fold longer half-inactivation time in 50% aqueous methanol. The immobilized Dieselzyme 4 enzyme retains the ability to synthesize biodiesel and has improved longevity over wild-type or the industrially used Brukholderia cepacia lipase during many cycles of biodiesel synthesis. A crystal structure of Dieselzyme 4 reveals additional hydrogen bonds and salt bridges in Dieselzyme 4 compared to the wild-type enzyme, suggesting that polar interactions may become particularly stabilizing in the reduced dielectric environment of the oil and methanol mixture used for biodiesel synthesis.
CONCLUSIONS: Directed evolution was used to produce a stable lipase, Dieselzyme 4, which could be immobilized and re-used for biodiesel synthesis. Dieselzyme 4 outperforms the industrially used lipase from Burkholderia cepacia and provides a platform for still further evolution of desirable biodiesel production properties.

Bacterial lipases from family I.1 and I.2 catalyze the hydrolysis of triacylglycerol between 25-45 degrees C and are used extensively as biocatalysts. The lipase from Proteus mirabilis belongs to the Proteus/psychrophilic subfamily of lipase family I.1 and is a promising catalyst for biodiesel production because it can tolerate high amounts of water in the reaction. Here we present the crystal structure of the Proteus mirabilis lipase, a member of the Proteus/psychrophilic subfamily of I.1lipases. The structure of the Proteus mirabilis lipase was solved in the absence and presence of a bound phosphonate inhibitor. Unexpectedly, both the apo and inhibitor bound forms of P. mirabilis lipase were found to be in a closed conformation. The structure reveals a unique oxyanion hole and a wide active site that is solvent accessible even in the closed conformation. A distinct mechanism for Ca(2+) coordination may explain how these lipases can fold without specific chaperones.

Lipases constitute the most important group of biocatalysts for biotechnological applications. The high-level production of microbial lipases requires not only the efficient overexpression of the corresponding genes but also a detailed understanding of the molecular mechanisms governing their folding and secretion. The optimisation of industrially relevant lipase properties can be achieved by directed evolution. Furthermore, novel biotechnological applications have been successfully established using lipases for the synthesis of biopolymers and biodiesel, the production of enantiopure pharmaceuticals, agrochemicals, and flavour compounds.

The x-ray structure of the lipase from Pseudomonas aeruginosa PAO1 has been determined at 2.54 A resolution. It is the first structure of a member of homology family I.1 of bacterial lipases. The structure shows a variant of the alpha/beta hydrolase fold, with Ser(82), Asp(229), and His(251) as the catalytic triad residues. Compared with the "canonical" alpha/beta hydrolase fold, the first two beta-strands and one alpha-helix (alphaE) are not present. The absence of helix alphaE allows the formation of a stabilizing intramolecular disulfide bridge. The loop containing His(251) is stabilized by an octahedrally coordinated calcium ion. On top of the active site a lid subdomain is in an open conformation, making the catalytic cleft accessible from the solvent region. A triacylglycerol analogue is covalently bound to Ser(82) in the active site, demonstrating the position of the oxyanion hole and of the three pockets that accommodate the sn-1, sn-2, and sn-3 fatty acid chains. The inhibited enzyme can be thought to mimic the structure of the tetrahedral intermediate that occurs during the acylation step of the reaction. Analysis of the binding mode of the inhibitor suggests that the size of the acyl pocket and the size and interactions of the sn-2 binding pocket are the predominant determinants of the regio- and enantio-preference of the enzyme.

Pseudomonas sp. 109 produces a unique lipase (LipL) which efficiently catalyzes intramolecular transesterification of omega-hydroxyesters to form macrocyclic lactones. The production of the enzymatically active LipL requires a specific molecular chaperon (LimL protein) together with a low-M(r) lipase-activation-factor (LAF) of unknown structure. From 50 g of Pseudomonas cells, 2.15 mg of LAF was purified as a sulfobenzofurazanyl derivative after methanol extraction, derivatization, and C(18) reverse-phase HPLC. One-dimensional and two-dimensional 600 MHz (1)H-NMR and fast atom bombardment mass spectrometry (FAB-MS) revealed that LAF is glutathione. Because several SH compounds (L-cysteine and mercaptoethanol) were similarly effective to native LAF in the activation of LipL, and because only LipL contains two cysteinyl residues forming an intramolecular disulfide bond, it is concluded that the reduction of and reformation of the intramolecular disulfide bond of LipL is essential to liberate free and fully active LipL.

Knowledge of bacterial lipolytic enzymes is increasing at a rapid and exciting rate. To obtain an overview of this industrially very important class of enzymes and their characteristics, we have collected and classified the information available from protein and nucleotide databases. Here we propose an updated and extensive classification of bacterial esterases and lipases based mainly on a comparison of their amino acid sequences and some fundamental biological properties. These new insights result in the identification of eight different families with the largest being further divided into six subfamilies. Moreover, the classification enables us to predict (1) important structural features such as residues forming the catalytic site or the presence of disulphide bonds, (2) types of secretion mechanism and requirement for lipase-specific foldases, and (3) the potential relationship to other enzyme families. This work will therefore contribute to a faster identification and to an easier characterization of novel bacterial lipolytic enzymes.